What is a British Standard?

Nov 20, 2026 | Industry Advice

Screenshot 2026 10 27 163012 What is a British Standard?In this issue’s BSGA Corner, the BSGA’s technical committee helps shed light on what a British Standard is and how these frameworks affect the signage industry.

British Standards provide an agreed framework for good practice, safety and consistency. They are not legislation, and compliance with a standard does not replace applicable legal duties.

BS 559 is an important British Standard for the signage industry, providing requirements and recommendations for the design, manufacture and installation of interior and exterior signs.

BS 559-1:2023 is the current published standard, covering design, manufacture and installation. BS 559-2 will extend the series to inspection and maintenance once signs are in service.

The draft is progressing through the BSI standards process and, until published, should be treated as proposals rather than established requirements – together setting out a developing framework for signage from design through to ongoing maintenance.

BS 559-1: design, manufacture and installation

BS 559-1:2023 replaced BS 559:2009and came into effect in February 2023,covering the sign making process from pre-manufacture surveys and material selection through to design, manufacture and installation, considering factors such as service life, safety, environmental conditions and documentation.

In practice, this means considering the sign as a whole and how it will perform in its intended environment – material suitability, structural loading, fixings, foundations, working at height, weather conditions and the structure to which the sign is attached. Documentation is also important, providing a record of the sign and supporting its management throughout its service life.

BS 559-2: inspection and maintenance

The BS 559-2 draft addresses what happens after signage has been installed, covering illuminated and non-illuminated signs, fixed and portable signs, digital displays and electronically changeable signs. Road traffic, fire safety, railway trackside and airside airport signs are excluded, as these are covered elsewhere.

Signs, fixings and supporting structures can deteriorate or change over time, and part two puts the condition of an in-service sign under much sharper
focus, proposing a more structured approach to inspection and maintenance.

What could inspection and maintenance mean in practice?

The draft takes a risk-based approach, with the level of inspection depending on the type and location of the sign, its age, condition, environmental exposure, accessibility and associated risk.

A minimum physical, on-site inspection is proposed annually, or within 12 months of the previous inspection or installation, with frequency increased
where circumstances require. This is not simply about whether a sign remains presentable – it can extend to the sign itself, fixings, supporting structures, foundations, electrical systems and the surface it is fixed to, wherever deterioration could affect safety or stability.

Competence is another key theme. Inspectors would need: training, skills, experience and knowledge appropriate to the type, scale and complexity of the installation.

Existing signage brings its own challenges: where installation date, service life or inspection history cannot reasonably be established, an enhanced
inspection regime is proposed – particularly relevant to those managing larger or older signage estates with incomplete records.

What does this mean for sign owners and duty holders?

One of the draft’s most significant aspects is its focus on responsibility once a sign is installed, through the concept of the sign holder – the person
or organisation that assumes legal responsibility, whether a building owner, occupier, tenant or other appointed party.

Where responsibility is shared between landlord and tenant, sign safety and inspection duties should be clearlydefined in writing through the relevant
lease or management agreement. The practical starting point: know what signs you have, their location, construction, installation date, condition,
and who is responsible for their ongoing management.

The draft also proposes that the principal contractor or supplier provide information on recommended inspection frequency, scope and maintenance
following installation, linking a sign’s design to its ongoing management as an asset, rather than something left until a problem arises.

David Derbyshire, chair of the BSI CPL/34/11 Electric Signs Committee, which oversees the BS 559 series, said: “Standards are most effective when they reflect the realities of how an industry operates. BS 559-2 has been developed with practical application in mind, helping to support safer outcomes, clearer responsibilities and improved long-term management of sign assets.”